Earthquake Geotechnical Engineering Module 3 – Liquefaction Hazards

Published 01 May 2016
Compilation N/A
Earthquake Geotechnical Engineering Module 3 – Liquefaction Hazards

The sequence of strong earthquakes in Canterbury in 2010 to 2011, most notably the devastating Mw 6.2 earthquake on 22 February 2011, the source of which was located within Christchurch, resulted in 185 fatalities and extensive damage to buildings and infrastructure. Liquefaction occurred on several occasions through the city and nearby areas. The damaging effects of this liquefaction included lateral spreading, settlement, foundation failures, subsidence of areas close to waterways, and large volumes of sediment ejecta on the ground surface.

This module on liquefaction assessment focusses on the identification, evaluation, and mitigation of liquefaction hazards. More detailed information on geotechnical investigations for liquefaction assessment purposes is covered in Module 2.  Guidance on estimating ground motion parameters is given in Module 1, whilst more detailed information on the mitigation of liquefaction hazards by ground improvement is covered in Modules 5 and 5a, and on foundation design at sites with liquefaction in Module 4.

Leave a Reply

Issue N/A
Volume N/A
Version N/A
Tags ,
ISBN 978-0-947497-50-7